Preachers HOT ROD Cycle Designs . Com

We do Prototyping to turn ideas into solid "flesh and blood" metal to test an idea or to fulfill a dream for your custom bike.

Click here to see more of this project.

Another one off piece from Preachers Hot Rod Cycle Designs. Space restrictions  mandated a custom coolant over flow can for Scott's Turbo Honda civic. Removable top  with twin O rings. the top is internally vented and has An fitting with stainless siphon tube. It's attached to radiator shroud also by Preachers.

 

 

 

 

 

Top motor mount with coil bracket and switches for lights, ignition nitrous with smoothed Dyna coils.
Built extra strong for big horse power engine.


Click here to see more of this project

 

 Click here and see more!

Carb for Sinner Bike, done!         This carb will go on our new shovel project. We started with a brand new S&S super E. Sent that to Henry Canup metal polishing and it came back like this. Awesome! then we made bracket to hold the micro switch and made a mini bearing to roll across the actuator. Machined it for the thunder jet kit. That adds an extra air and fuel circuit. we also added a #6 AN connecter for the fuel line. We will add pictures of the air cleaner with polished backing plate later.

 Click here and see more!

 

Please click to see the more pictures of this project!



Please click to see more pictures of this project!

We built this catch can for a Turbo Honda Civic.  We machined the tubes for AN fittings welded the fitting on then turned down the tube to smooth weld out.

Thanks to Dave at D&G chassis for welding it all together. We then polished it all to perfection.

See the cam cover we painted for this same car.



Here it is! We made this rear wheel sprocket spacer for Dime City! Billet aluminum. extra material left for added strength! Doing it custom saves offsetting wheel even down to .001 thousand for perfect alignment!

We can also do 4 to five bolt pattern adapters. any thickness. eliminates stacking spacers!

           

Please click on pictures to see larger photo!

See the spacers we offer!


Please click on pictures for the full story!

 



See the Valve Covers we do for Honda racers!

We did these cam covers for two tuner cars. One is a stock one that arrived with some sort of paint or powder left over and had the lettering taped off. this customer said his part was ready for paint, we DIDN"T think so.

The other received An fittings for a over flow breather can we made previously. then we modified the cam gear opening for the adjustable cam gears and added a billet plug wire plate instead of the cast one. Both covers were then bead blasted (after taping to keep oil deflectors clean) then taped it all off leaving the lettering exposed for blocking  sanding smooth and then polish the letters.

We then removed the tape and cleaned the excess off with wax grease remover.  taped over the letter and used a D A to smooth the large areas and hand sanded the small nooks.

We then masked off the lettering each one separately . shot the sealer, sanded it, re taped the letters , shot the prime and hit it with 3 coats of color then 3 coats of clear. after drying I used great caution taking off the tape over the letters revealing the polished like chrome letters!   
        

Please click on pictures to see larger photo!

See the Valve Covers we do for Honda racers!

 

 


Welding and Cool Parts

 


Kick Stands...well we do them too...bet you never saw one of these!